To give our customers a better selection of top-tier quality apparel at better prices, we have decided to partner with a licensed vendor. This link is a separate company that charges, ships, and sends separate order information from your Dead On orders.

Plastic warning and instructions

Say hello to Red label Plastisol! It is comparable to what most other companies are selling.

Being our entry-level, It does have some odor when cooking but fades after curing. We highly recommend using a NIOSH Organic vapor cartridge mask when using it as well as proper ventilation.

.

Please Read
Thank you for selecting Dead on Plastix for your plastisol needs!
We are here to answer your questions. Please contact us first, before posting to social media.
We know our product better than anyone else.
To make the experience as fun and easy as possible, we have included the following
instructions.
Please start with safety first. Gloves, safety glasses, respirator, and proper ventilation.

1. Start by mixing your plastisol. We recommend a plastic drill attachment for 5-gallon buckets.
1-gallon jugs: Set on their side for 5 minutes (until resins have moved to the bottom of the side).
Pick up and shake left to right for a few seconds. The plasticizer (clear liquid) must become
fully integrated with the resins (white substance). Failure to sufficiently mix will result in a gooey
mess that will not be set up.

2. For full conversion of product, the product must reach a temperature minimum of 350
degrees Fahrenheit (do not heat past 400 degrees). Failure to do so will result in a gooey mess
that will cure. We highly recommend a digital quick-read thermometer. Infra-red guns are not
reliable, they only read surface temperatures and sometimes are not calibrated correctly. Our
product is very versatile; you can shoot it from 400 degrees down to 280 degrees. If heating
with a microwave, stir and check temps with a probe thermometer during cycles. You are now
ready to go.

3. If you have followed the above steps, you are now ready to de-mold. Our plastisol is a very
clean product that does not leach oils. We recommend
letting baits cure for a minimum of 24 hours after pouring, we do not recommend curing in
water, soft plastic baits are porous.

4. Finish bagging: We highly recommend a quality laminated bag (such as " Clear Bags") for
packaging. Just add non-phthalate worm oil or your favorite phthalate worm oil-based
scent. We recommend adding scent after baits have cured and not added during the heating process, which could cook off your scent. Standard bags such as Ziplock, Glad, etc., will
draw moisture, and oils from lures causing them to dry out and become brittle over time.
5. Notes***We recommend that remelts to chopped up into small, uniform-sized pieces before
heating. Remember remelts do not have to be heated to 350 degrees, only a pourable
temperature. The chemical reaction has already been reached in initial heating.

Say hello to Dead On Red Label plastisol! Despite its entry-level designation, this product offers remarkable quality andperformance, aligning neck & neck with industry standards across the globe.Our pricing may stand out as exceptionally competitive, please knowthat our philosophy on pricing is driven by a dedication to fairness andintegrity within the industry. So, there’s that.But Dead On Red Label has also been meticulously engineered foroptimal performance in injection applications. Enjoy it’s unparalleledclarity post-curing, devoid of any haze. Its unique formulation as afloating plastisol only further enhances its versatility, enabling users toincorporate sinking additives according to their preferences and needs.This is it, this is the stuff. We assure you, it is the smartest $26.99 thata seasoned or aspiring lure maker can spend on lure making supplies.

Please Read

Thank you for selecting Dead on Plastix for your plastisol needs!
We are here to answer your questions. Please contact us first, before posting to social media.
We know our product better than anyone else.
To make the experience as fun and easy as possible, we have included the following
instructions.
Please start with safety first. Gloves, safety glasses, respirator, and proper ventilation.

1. Start by mixing your plastisol. We recommend a plastic drill attachment for 5-gallon buckets.
1-gallon jugs: Set on their side for 5 minutes (until resins have moved to the bottom of the side).
Pick up and shake left to right for a few seconds. The plasticizer (clear liquid) must become
fully integrated with the resins (white substance). Failure to sufficiently mix will result in a gooey
mess that will not be set up.

2. For full conversion of product, the product must reach a temperature minimum of 350
degrees Fahrenheit (do not heat past 400 degrees). Failure to do so will result in a gooey mess
that will cure. We highly recommend a digital quick-read thermometer. Infra-red guns are not
reliable, they only read surface temperatures and sometimes are not calibrated correctly. Our
product is very versatile; you can shoot it from 400 degrees down to 280 degrees. If heating
with a microwave, stir and check temps with a probe thermometer during cycles. You are now
ready to go.

3. If you have followed the above steps, you are now ready to de-mold. Our plastisol is a very
clean product that does not leach oils. We recommend
letting baits cure for a minimum of 24 hours after pouring, we do not recommend curing in
water, soft plastic baits are porous.

4. Finish bagging: We highly recommend a quality laminated bag (such as " Clear Bags") for
packaging. Just add non-phthalate worm oil or your favorite phthalate worm oil-based
scent. We recommend adding scent after baits have cured and not added during the heating process, which could cook off your scent. Standard bags such as Ziplock, Glad, etc., will
draw moisture, and oils from lures causing them to dry out and become brittle over time.
5. Notes***We recommend that remelts to chopped up into small, uniform-sized pieces before
heating. Remember remelts do not have to be heated to 350 degrees, only a pourable
temperature. The chemical reaction has already been reached in initial heating.

Because fragile glassware in a lure shop makes as much sense as a milk chocolate teapot.

Our new high-end Borosilicate pouring cups laugh in the face of thermal shock—take that, freakin Soda-Lime glass!

Picture this: You’re in the shop, and suddenly your beloved wall-mounted moose head falls, you my friend, might just set that hot cup-o-dead down atop a cold surface. But just because you’re out (another) moose head, and regular glassware cowers in fear, doesn’t mean Dead Measures will.

These bad boys & gals are thicker and shorter, just like your friend Marshall who’s always hogging the spotlight in photos – cool it, Marshall.

Dead Measure is made for whatever shop drama may come their way. So why settle for glassware that’s as delicate as your GamGam’s fine china? Dead Measures are the Hulkster of pouring cups—tough, oil-friendly, unyielding, and just so dang suave. Whether you’re starting or a microwave warrior, these cups are the sidekick you’ll want. Life is too short for glassware that can’t handle the heat, The Dead were made for it.

Dead On Plastix is thrilled to bring you a superlative liquid colorant more vivid, more concentrated , in an array of color options to suite your needs. Utilizing our proprietary shaker shot added to each and every bottle, your cups are guaranteed to pour vibrant colors with only a quick one minute shake of your Dead On Liquid Colorant bottle. Available in 4 ounce options, no workshop is complete without an array of Dead On Liquid Colorant! 

PSA: We  make our colorants to be around 40-50 drops per cup for any colors that are not Prime, Secondary or Tertiary. It allows for the user to change the saturation levels themselves and or add any other colors they wish before reaching saturation. Prime, Secondary or Tertiary I made to be very strong and use much less drops per cup. Treat them like any paint and shake for one minute minimum before use for best results.

One week lead time is required for fulfillment of bulk orders.

Please use the form at the bottom of homepage for bulk ordering. 

We do not sell drums of plastisol. We will ship pallets of 5-gallon buckets. Information is needed for shipping quotes on LTL freight. i.e. Lift Gate needed? Address? Please use the form below.

Dyes of the Dead, UV’s and Morph colorants.

• Quarts $40.00 each.
• Gallons $125.00 each.

Paragon Pearls.

• Quarts $45.00
• Gallons $145.00

Dead Flake.

• 1 lb. $30.00

Uncut Pearls and UV’s.

• 1 lb. $32.00

Hardener and Softener/Worm Oil

• 1 gallon Hardener $65
• 1 gallon Softener $55

Scents

• Quart : $60
• Gallon $220

We’ve developed a completely unique base formula that serves as the perfect canvas for your creativity. With Color Morphs, you can transform your lures and baits to adapt to the conditions, taking your fishing game to a higher level. Imagine your Blue Craw lure taking on a deeper, more lustrous blue finish with just a touch of Blue Color Morphs, or accentuating the natural brown tones with Neo Orange?! (That’s a GOOD day on the water) and we’ve made quite sure that the possibilities are limitless. Our Color Morphs are designed for ease of use, start with just 25 drops per half cup, see how you like it, and add more if needed.

Expect results that are stunning and vibrant, especially when viewed in natural light. Keep in mind that artificial lighting can alter the appearance of soft plastic bait, (remember how the camera manufactures program settings for LED, Tungsten, and Fluoro lighting? Yup, that.)For those who want to push their color customization even further, we highly recommend** using approximately 40-50 drops per cup for non-Prime, Secondary, or Tertiary colors. This will allow you to exercise complete control over the saturation levels and experiment with other colors before achieving the desired effect. If you’re working with Prime, Secondary, or Tertiary colors, Dead On ColorMorphs are exceptionally potent and require fewer drops per cup. Just treat them like any paint, give them a good shake for one minute before use, and watch your baits transform! Dead On Plastix Color Morphs are the ultimate tool for anglers who appreciate the art of fishing and moreover want to enhance their success. With our unique bases and incredible versatility, you can’t miss

Blue Craw

Metal Mist

Synthetic

Kiwis

Smashberry

DOPamine

For full Color Drop downloads visit: https://deadonplastixllc.com/color-drop-count-pages/

Ginger 

Argon

Mars

Lilac

Tahiti

24k

Atmosphere

Magma

Frost

Haze

Blurple